1990 toyota standard cab,and MISC.

[whoknows]

Parting out 1990 Toy standard cab 4x4

bottom end of 22re $50
5 speed and tcase $275
driveshafts $60 ea
90 fuel tank with pump $75
85 fuel tank with pump $50
bobbed bed (pretty rough) $25
sky's solid axle swap kit NEW $175 paid $210
bench seat $30
BRAND NEW Rancho 44044 springs, $325 paid $375
ask if you need something else i may have forgot

Parting out 1979 Bronco
460 ?? condition, does have some performance parts $250
C-6 $150
6" lift coils $75 new
460 motor mounts to bronco new $50
radiator, bunch of misc
near new steering column for same with nice grant steering wheel $200
460 block, cleaned, ready for mill work $75

1988 Ford Bronco complete, full size 302, Aod, 208 30% on 33's and decent rims, drivers window won't roll up and tailgate window needs some attention, motor tranny t-case axles work well, good hunting rig or dd with some work $1100

76 ford pickup box trailer, needs minimal work to finish, real nice bed, no tailgate, on 35's and 14 bolt axle with body lift, $250

4 BFG 33x9.5x15 Mud terrain tires 50% on black 15x7 steel rims 6x5.5 $175

1995 PSE Fire flight express compound bow, needs cable guard 75-90 pound 30" draw length, nice looking bow, $40

[megatoy66]

How does the motor run? I'm interested, Odie, (253) 961-4085.

[whoknows]

Well it did run great, til someone stole the head and fuel injection.... if you need a block and misc atttached to it...it's a good deal.

[class5kayaker]

I'm interested in the transmission, any problems with it (staying in gear, etc)? How many miles on it (roughly)

My # is 206-931-6486. Also, I'm in Everett... Know of any easier way to get it here than me driving all the way to Yakima?

[whoknows]

I'm interested in the transmission, any problems with it (staying in gear, etc)? How many miles on it (roughly)

My # is 206-931-6486. Also, I'm in Everett... Know of any easier way to get it here than me driving all the way to Yakima?


I'll have to get back to you, have one person interested in tranny-t-case combo, I only drove the truck home from buying it, then while in the tear down phase of the project, somebody helped themselves to the head and fuel injection set up, pissed off and bored of this project forces parting it out.

[440_D50]

I want the engine. Can I come this weekend and pick it up??? I'm about 6 or 7 hours from you though. Are you positively certain that this thing was in good shape???


If I drive there and buy it, and get it in my truck and it's knocking, we'll just say I won't be too pleased....

If it is indeed good to go, I'll be there Saturday if that's OK. Any way you could e-mail me some pics???

[class5kayaker]

Are you still there? I need a transmission, but i'm prolly gonna buy one on Monday... I E-mailed a couple times.

[Poohbair]

got pics of the trailer?

[mcbadwish]

Do you have the fuse block?

[blaz4x4]

Areyou keeping the rear springs? I am in need of a set of this year.

[whoknows]

[QUOTE=440_D50]I want the engine. Can I come this weekend and pick it up??? I'm about 6 or 7 hours from you though. Are you positively certain that this thing was in good shape??? END QUOTE]

I drove the truck from naches to here (bout 25 miles,) the only thing wrong with the truck was a rear u-joint that was ready to go, it's been parked down at my shop and some jackasses stole the fuel injection and head off the engine, it's remained covered but i don't know if in their haste to steal parts nuts and bolts got dropped into it or ???? No guarantee, it won't run right now for me to verify. it didn't knock, don't know if it burned oil, i drove it 25 miles and didn't notice any smoke or anything. hold it upside down and shake it real well...????


Rear springs are gone. I have a set of 63" chevy's with some sweet hangers i built for them $150 u pick up

TRANSMISSION is good if you need it come and get it sorry for the late replies guys, i work alot. $300 tranny and t-case or $200 just tranny.

Everything is going now, cab, frame,
sky's front hanger, shackles, for standard width, new never installed $175.

[whoknows]

got pics of the trailer?
i don't right now, once the tongue goes on it it will be a nice looking truck bed trailer on 35's no tailgate bed is pretty straight, ohhh and it needs some u-bolts and lug nuts, i'm thinking the 14 bolt and tires and wheels are worth the $200, everything else is freeeeeeeee.

[Rochon, David S]

Hi I was wondering if you still got the bed and if so can you post a pic for me
I am interested in very much. If so let me know asap and i will come get it or have my brother who is spokane come get it for me. And if dented really bad how does $50 or $75 sound, I will be coming from seattle. So like to make it worth my while if possible.
thanks
David

[Vicious Sniper]

do you still have the doors. if you do give me a call (425)268-0328

[whoknows]

ttt