82 Chevy 3/4 ton 2wd truck

[Crunch]

Parting out the hulk.

82 Chevy 3/4 ton 2wd long box

So far, this is whats gone:

Motor
steering box
seat
springs and hangars (rear)
rear axle
parking brake cables
hood release cable


I have the following parts in really nice shape

hood = almost perfect, needs cleaned
grille = very nice shape
chrome trim = excellent shape
headlight bezels = excellent shape
core support = good shape, minor cancer on pass. side, mostly surface
passenger fender = very straight, ugly ass paint though
three row radiator = excellent shape
all glass = almost flawless - no cracks
passenger door = very good shape, minor surface rust at the bottom
dash bezel = perfect except for one hole for an auxilary guage on bottom left
instrument cluster - excellent shape
automatic column - very good shape
wiper motor - nice shape and works smooth
front bumper - painted steel, very straight, all brackets and bolts included


USEABLE BUT ROUGH PARTS

drivers door and fender = some dents and light rust
both inner fenderwells = some sizeable cancer
3/4 ton master cyl and booster = master is rusty on outside


Frame is in good shape, cab has a couple holes in the floor under the seat

If you want something that isn't listed, lemme know, it's probably there

[wheelinuttin]

How much you wanting for the windshield?

[Crunch]

If i pull it, it'll be on saturday morning, and i'll take $40 for it

OR

you can meet me on saturday and pull it yourself if you want. you buy the beer?

[BustedPinion]

windshield??

[Crunch]

Windshield is sold

[kennyw]

Do you have a good 2wd TH350?

[Crunch]

Yep, I got three of em.

$100 a piece, all are under 100,000 miles.

[Donahue]

got a rear driveline?

[Crunch]

yep, sure do

if you want it, lemme know how you wanna go about getting it.

$25 sound good?

[4544x4]

does it have a sliding rear window? :bounce1:

[Crunch]

nope, solid glass.

[Donahue]

its a 1350 u-joint right? any idea on the tube diameter or thickness?

[Crunch]

I'll take measurements on it tomorrow.

As for the joint, I'm not sure, but it might be a 1310, I don't remember ever seeing a 1350 yoke on a 14bolt semi-floater. I'll take a look at it when i measure the driveline.

[kennyw]

I'll take measurements on it tomorrow.

As for the joint, I'm not sure, but it might be a 1310, I don't remember ever seeing a 1350 yoke on a 14bolt semi-floater. I'll take a look at it when i measure the driveline.
Will either be the S44 or 1350 U-joint I believe.

[Donahue]

what do you want for the doors?

[impish]

does it have a sliding rear window? :bounce1:
i have 2 out of truck already..

[Crunch]

Oh......................umm well.......................I kinda got tired of looking at em and took what was useable and tossed the rest.

Sorry...................... :wasted:


Kennyw - - - I have the driveshaft in my garage for ya. It is a 1350. needs a new carrier bearing though.