Parting my cherry ride

[white-rhyno]

The only thing im keeping off this is the winch and front driveline...
http://krazyk5.com/albums/naches_memorial_day_2005/013_13A.sized.jpg

axles-> $2300
dana 60 gm dually
detroit, 4.88's yukon 35 spline stubs with warn driveflanges, yukon inners just not installed, rocklogic ram, sky highsteer arms (bolted on, not being used..... dont ask why....) wfo tie rod with hiems. Knuckles were COMPLETELY rebuilt, had death wobble when i put it in..... of course, the ram fixed it..

14bff not shaved..
detroit 4.88's and disk brakes, 4" wheel spacers

tranny and cases --> $1500
sm 465 203 gen I doubler 27 spline input 205. 205 has 32 spline front output with 1410 yolk, rear output is stock 1310?? i dunno, it works for me. Comes with the pedal assembly out of my 75 chev cab, complete swap for a chevy guy

motor--> $1300

75 era block, 4bolt main 010 block with tbi heads, motor was built by flinchbaugh customs in Kallispell MT.

tbi was pulled off an 87, with affordable fuel injection wiring harness and custom chip. Runs really good in the top end, cant fiqure out why i dont have any bottom end...

wheels and tires--> $1600
42 tsl's with about five trips on them and hummer wheels, wheels were powder coated black with blue rings. THey look good when they are clean. wheels have stazworks inserts in them.

thats all the big stuff anyway. the truck is still complete if you wanted to hear it run/ drive it, whatever.

However i cant dissasemble the truck until the middle of april......

Thanks
Brad

[Big Orange Toy]

Do you have the 63 inch chev springs?

[leadfoot067]

rear springs are ford 57s...

[Paulie]

wanna sell a hi-steer arm..

[verrive]

wanna sell a hi-steer arm..

If you do I'm local and will take them pending on price :D

[white-rhyno]

wanna sell a hi-steer arm..
really want to keep them with the axle.

Brad

[white-rhyno]

rear springs are ford 57s...

Thanks Shane

[Paulie]

If you do I'm local and will take them pending on price :D :confused: let me know.

[Donahue]

:confused: let me know.

why dont you just pony up and buy one?

[Paulie]

Dont worry about it...

[white-rhyno]

Dont worry about it...

youll be the first to know if someone buys the axle, and dosnt want the arms.

[Fullywrecked]

How much for the headlights?

[yotamasher]

maybe interested in a 1970 landcruiser fj 40 for the hummer wheels and 42 tsl's?

[Poohbair]

How much for the headlights?

Brads just moved and doesn't have internet yet... he said $50 for the lights

[Poohbair]

maybe interested in a 1970 landcruiser fj 40 for the hummer wheels and 42 tsl's?

He wants to know more about the FJ, info, condition, and post up a couple pictures...

[yotamasher]

i will try and get some pics posted up shortly. Cruiser is light blue, has a hardtop, all dash in original cond. and not hacked up. little rust in the rear in the corners and below tailgate. floorboards are solid but has a little surface rust on the driver floor. runs but needs some carb work. been sitting for a long time and the clutch has froze to the flywheel. comes with all new brakes and a box of other parts. also a little rust on inside in the rear on the floor around the passenger side body mount. few minor dings in the front fenders but overall in good shape.i was looking to get 1800-2000.if your looking to part with the hydro steer too maybe you could cut me a deal on that as well. i just got 1ton for my 93 SAS toy so im in need.

[Fullywrecked]

Tell him I will buy his lights. Thanks POOh :beer:

[Poohbair]

Tell him I will buy his lights. Thanks POOh :beer:

Cool. I told him tonight. He just moved into his new house this weekend w/ the shop and stuff, so probably in the next week or 2 the truck will start getting torn apart.

[79chevy39.5's]

those are the 16.5 beadlocks right? if so how much

[Poohbair]

those are the 16.5 beadlocks right? if so how much

His internet wont be hooked up until the end of this week. I think he wants to keep the tires/wheels together...but yeah, they are 16.5's

He said 1600 for the tires and the wheels. The 42's are damn near brand new, and the wheels are powder coated H1 rims w/ the Stazworks beadlock inserts in them.

[79chevy39.5's]

the 42's are just bqarely to big for my truck, so if he decides he wants to separate let me know

[79chevy39.5's]

also what is he doing with the bed, if he wants to sell id like to see some pic's and get some details on it

[Poohbair]

also what is he doing with the bed, if he wants to sell id like to see some pic's and get some details on it

I am pretty sure that he is going to be selling the flat bed. It is probably pretty short for a lwb truck... his truck is a K5 frame w/ a P/U cab, and the bed only goes from the back of the cab to the shackles.
His internet will be up on Friday so he should be able to give you a better answer on length, etc... and we can get some more pictures of stuff.

[89runner]

How much lift did the springs give him

[donkey]

If interested how much for ram and orbital plus lines

[Poohbair]

If interested how much for ram and orbital plus lines

Its not full hydro... just hydro assist

[Poohbair]

How much lift did the springs give him

I would have to guess around 4-5"????

[MeanGene]

would you b interested in selling the wheel spacers

[white-rhyno]

would you b interested in selling the wheel spacers

finally got internet back........

im going to keep the wheel spacers with the axles for now, if something goes south, ill let you know.

SHane&Fullywrecked, got your stuff pulled, just need to get it in Poohs car. We will work out the $$ later.

Just an update
motor and tranny are pulled, cab is off. Ill let the rolling chassis go for $3800. Not a bad deal if a guy wanted to put a cab on there. Exhaust is still on it. Pulling the rest apart this weekend if there is no interest for the chassis.

[79chevy39.5's]

wut are the dementions on the bed?

[MeanGene]

finally got internet back........

im going to keep the wheel spacers with the axles for now, if something goes south, ill let you know.

Thats cool thanks

[white-rhyno]

wut are the dementions on the bed?

Ill get them for ya tomorrow.... its short, probably wont work for your long bed.

[79chevy39.5's]

dont plan on there bein much of the bed left

[Paulie]

still interested in that one arm.

[verrive]

Not to speak for him Paulie but the axles as whole might be gone, I was talking to a local guy I know and the gist of the conversation I had with him made me think he bought them.

[Paulie]

Right on, just thought id let him know im still interested in one.

[Poohbair]

I was just at his house all day yesterday, and the axles are still there, but I still don't think he wants to sell any pieces off of them

[79chevy39.5's]

pm'd you already but how much for the front axel, with all steering parts

everythin jsut no rear axel

[white-rhyno]

pm'd you already but how much for the front axel, with all steering parts

everythin jsut no rear axel

you got mail.

[white-rhyno]

Not to speak for him Paulie but the axles as whole might be gone, I was talking to a local guy I know and the gist of the conversation I had with him made me think he bought them.

who was this you were talking to???

[verrive]

who was this you were talking to???

greg ogan, he made it seem like he was gonna buy em but I'm usually really out of it so maybe I just heard him wrong. I'd be all over it if I didn't already have a much less built pair :D

[white-rhyno]

greg ogan, he made it seem like he was gonna buy em but I'm usually really out of it so maybe I just heard him wrong. I'd be all over it if I didn't already have a much less built pair :D

who are you??

[verrive]

Sent you a PM even :D

[white-rhyno]

Axles wheels and tires are gone............