goobyb4u8
02-27-2006, 05:24 PM
Ok i have an 89' Jeep Yj project rig. Red with black hard top and full soft doors that arent supposed to go with the hard top but they work ok. its flat fendered in the front with tj flairs. It has a 2" shackles front and rear and spring over with stock springs. 35" BFG muds with black rock crawler rims. it has a dana 30 front with 4.88 with lunch box locker and a 4x4 posi lock. the rear is a ford 8.8 with discs,4.88s, and a full detroit. both axles have rock guards on the covers. It has a 4.2l that has about 50k and trans with about 30k (paper work was stollen for both) Runs great after it worms up, it does move but you wouldnt want to drive on the street as the rear driveline has lots of vibration (lengthened stock driveline so it could be moved around) This is a good rig but is a project, a buddy was going to buy it but doesnt have the money. and my parents keep bugging me to sell it and pay them the money i owe them otherwise i would finish it and try to sell it for more.
What it needs-
I have a slip yoke eliminator and front and rear cv drive lines but the eliminator needs to be installed and the drivelines lengthened/shortend.
The exhaust isnt great and should probably be redone.
The font steering needs either crossover steering or an S draglink because of the spring over.
could use some wheel spacers as the tires rub the leafs at full turn.
Needs brake lines bent up for the rear 8.8 it has lines on it now so it will stop but they arent great. i have the lines they would just need to be bent.
needs a full size spare as its got a matching wheel to all the rest but no tire.
It has an aftermarket weber carb for it but it needs to be rebuilt
there is probably soem more small stuff im forgeting
What it needs-
I have a slip yoke eliminator and front and rear cv drive lines but the eliminator needs to be installed and the drivelines lengthened/shortend.
The exhaust isnt great and should probably be redone.
The font steering needs either crossover steering or an S draglink because of the spring over.
could use some wheel spacers as the tires rub the leafs at full turn.
Needs brake lines bent up for the rear 8.8 it has lines on it now so it will stop but they arent great. i have the lines they would just need to be bent.
needs a full size spare as its got a matching wheel to all the rest but no tire.
It has an aftermarket weber carb for it but it needs to be rebuilt
there is probably soem more small stuff im forgeting