gm c/c 14 bolt $125

[JACKD]

out of a 81 cc chev trk. 4x4 456 posi comp. drum to drum the gears are not looking so good but i no some want these thing to put in jeeps it is 44" backing to backing

206 334 1722 jack

[kennyw]

More important is the WMS to WMS which is about 63". If you find one with good 3.73 gears I'd be interested in it.

[JACKD]

i dont no i have 3 of them but the others would be more

[impish]

i have a 3,73 lying around. from am 79 3/4 ton

[kennyw]

i have a 3,73 lying around. from am 79 3/4 ton
That won't be a 1 ton cab/chassis 14FF then.

[impish]

it is a 14 bolt... from a truck..why a cab/chssis?

[Erik D_lux]

Wanna sell just the hubs?

[kennyw]

it is a 14 bolt... from a truck..why a cab/chssis?
lol... you don't know much about them I take it? The cab/chassis 14FF is about 4-5" narrower than the SRW. On top of that the spring perches are different between a 1 ton and 3/4 ton.

[JACKD]

A C/C THE TIRES ARE ABOUT 4" WIDER THAN THE CAB THAT IS WHAT TOW TRUCKS HAVE IN THEM THEY ARE 44" BACKING TO BACKING OR ABOUT 63"WMS/WMS THEY HAVE 3 1/2 BRAKES ON THEM. ONE THAT READY TO GO IN, IS ABOUT $700 I JUNKED A TOW TRUCK , I COULD NOT FIND 1 AT THE TIME

[JACKD]

Wanna sell just the hubs?
WHAT DO YOU WANT PAY HUB/DRUM?

[Erik D_lux]

$50 for both hubs?

[JACKD]

? what are they going on . ! if you put them on a trk. rear what does it do for it . for the hubs bring $75 and pull them and you can have them

[Erik D_lux]

I have a standard 14 bolt now. I want to narrow it with these hubs. It will make me go from 67" wms to 63" wms.

I will pass on them for now. Let me know if you still have them hanging around and need to get rid of them. I will be in the Seattle area on the weekend of Feb 18th so I could pick them up then.

Thanks again.

Erik

[JACKD]

i have 2 sets of them

[impish]

i did some asking around- was told the brake backing plate mounts will have to relocated on a single wheel truck swap? :hmmm: any one know

[Fullywrecked]

I bought one of these for $25. :rolleyes: :corn:

[megatoy66]

I bought one of these for $25. :rolleyes: :corn:
:laugh: :laugh: :laugh: :laugh: :corn:

[JACKD]

good deal kind of like my $500 dana 60 that should be like $750 just like a 14 bolt c/c that is good to go is about $650-$850

[JACKD]

ttt

[Erik D_lux]

Feel like selling just the hubs yet?

[JACKD]

pm sent