weld on beadlock rings

[brian d]

available for 15" wheels only right now. 1/4" steel weld on rings sits inside the wheel lip. outer clamp rings available in 1/4" steel and 3/8 aluminum. 24 3/8 bolts per wheel. hardware not included.
set of 8 steel rings only= $175
set of 4 steel weld on rings, 4 aluminum outers= $300

located in yakima,wa. will take partial trades on 36-38" tires, 8 lug wheels,j20 steering box

[brian d]

http://pictures.sprintpcs.com/guest/viewOriginal.do;jsessionid=aFiDhwAxznK-?invite=5EEr4bJJ7P7VKLoooaXU&page=1&subject=A%20Picture%20Share! (http://)

[Harv. of Sorrow]

I will take a set....only a question or two first....

1. Are these CNC'ed on a laser or water table?

2. Are these the ones that CHEROCKEE was running on his XJ?

Please pm me your phone number and if you have a picture or two...your link isn't visible.

I will also pick them up in Yakima.

[fprbrooks]

Heres a pic of the set we made. Good Quality!!!!
http://www.brush-busters.com/getimage.php?id=236&show=large

[brian d]

thanks for the pic!

[landbruiser1]

Interested. How much would it cost to have them shipped to Tacoma?

[brian d]

approx $20

[Paulie]

I will take a set....only a question or two first....

1. Are these CNC'ed on a laser or water table?

2. Are these the ones that CHEROCKEE was running on his XJ?

Please pm me your phone number and if you have a picture or two...your link isn't visible.

I will also pick them up in Yakima.
these are the ones that i bought, yes they were on my XJ

[landbruiser1]

PM sent.

[landbruiser1]

Brian. I am still interested but wont have the money until the First. I will get a hold of you then and we can do the deal.

[noexcuses]

I have a set on my yota and they look great, have not had a chance to wheel with them yet but should work awsome.

[erslll]

http://www.fototime.com/7F806651596C79F/standard.jpg

Here is a pic of my locks from Brian. Seem to work great so far. More pics can be seen in the link in my sig.

[brian d]

top

[Fullywrecked]

Brian. I am still interested but wont have the money until the First. I will get a hold of you then and we can do the deal.

I wouldn't hold my breath.......he was supposed to buy some wheels & tires from me the next day.........and he didn't show up......I called him...he wouldn't answer....... I left him a message, a week later he E-mails me informing me he got some somewhere else. I wouldn't normally post info like this but he has done this to me in the past. :rolleyes:

[brian d]

thanks for the heads-up

[go4wlen]

Please pm me with youre phone # I've got ?'s and ready for some bead lock's
Thank's

[mightymouse]

I am interested in these but I have some ?????

I have heard conflicting info as to wether I can use these or not. I have rims with 2 3/4in back spacing. Some poeple say that I would be able to get my tire on because of the dish in the rim. I have always mounted my tires on from the back side and not the front. I won't be able to mount them this way correct??

Is this fact or fiction??? Anyone.

[erslll]

That is a fact. Although I have heard of people doing it but it involves a lot of work and probably a broken tire machine. :D The other thing to consider is that if you use the locks on the outside of your wheel, you really aren't accomplishing a lot because you are more likely to loose an inner bead with reverse center wheels.

[mightymouse]

So your saying that my rims are more prone to lose the inside bead first........
That is good info to know. I have never lost a bead but I never air down below 10psi.

FYI I'm running 39.5 Boggers

Thanks for the info. :D

[Big_MARK]

So your saying that my rims are more prone to lose the inside bead first........
That is good info to know. I have never lost a bead but I never air down below 10psi.

FYI I'm running 39.5 Boggers

Thanks for the info. :D

If you aren't airing down below 10 psi with 39s you are not airing down enouh. Even with 38s I was airing down to 6 front 5 rear, now with my 42s I go 5 and 5.

[mightymouse]

That's without bead locks?? And you haven't had any problems losing a bead???

[T.T.]

Brian. any beadlocks yet in 16" One of the croneys are lookin for some let me know TT

[brian d]

sorry, none yet. working on it

[leadfoot067]

I wouldn't hold my breath.......he was supposed to buy some wheels & tires from me the next day.........and he didn't show up......I called him...he wouldn't answer....... I left him a message, a week later he E-mails me informing me he got some somewhere else. I wouldn't normally post info like this but he has done this to me in the past. :rolleyes:




ummm ya he did the same thing to me on some tires a few months ago... :WTF:

[Brian H]

can you make some 17 in rings?

[brian d]

17s are still under development. to the top.

[toyota4x4matt]

P.M. Sent Brian.

[brian d]

to the top

[roccrawler]

great lakes offroad sells 17" weldons or Rock Buggy Supply also

greatlakes were 276 shipped no hardware
RBS 98 each with hardware

[jeepin_coug]

still looking for 38's and 8 lug rims?

[brian d]

pm sent

[Deerlick]

Do you have any more 15 inch if so please call me at 253 230 1707

[EtownYota]

how much to ship a set of steel 15 inchers to 98026???Also some rings make your wheels wider like 15X8's turn into 15X10's etc is this true?? Thanks

[wheelinjp]

I have a set of 15x10 8lugs in the for sale, would trade the value of what I want plus cash for a set of 15in steels, let me know, can deliver wheels and pick up.never mind I sold them today.

[Binder]

Brian D, did you ever make any 17's?

[brian d]

no 17s

[BustedPinion]

available for 15" wheels only right now. 1/4" steel weld on rings sits inside the wheel lip. outer clamp rings available in 1/4" steel and 3/8 aluminum. 24 3/8 bolts per wheel. hardware not included.
set of 8 steel rings only= $175
set of 4 steel weld on rings, 4 aluminum outers= $300

Brian! I have 15" steelies, so do i need the 175$ package? If so, how much to ship them to 98092? If its alot, can we meet where we met last time on the pass? Oh and you going to Naches Memorial weekend this year?

[brian d]

pm sent